Note: this camera was first sold in
Feb 2004.
There may be newer versions available.
Canon PowerShot S500
See rating based on
175
user reviews
Submit your own Canon S500 review!
- 4 out of 5
- 4 out of 5
Submit your own Canon S500 review!
No current offers available
Ask
Have a question about the S500?
Enter it here:
(You can enter more details in the next step)
Answered!
September 9, 2007 2:42 PM
Report Abuse
Did you find this question
helpful or
not helpful?
helpful or
not helpful?
This question has been answered!
September 10, 2007 1:33 PM
0
0
0
Well, you could try resetting the camera. This is a fairly easy procedure which involves either going into your setup menu and choosing "reset," or, removing the batteries for a few minutes. After which, you should have the camera reset to factory default settings. Another tip is to go to the camera's website and look for firmware updates. Download and install them.
But the real issue is that your camera was one of a host of cameras that suffered from a faulty CCD chip. Check out this service advisory from Canon regarding it.
Malfunction:
It has been confirmed that the connecting parts of the internal wiring of the CCD used in affected products may become disconnected, especially if the affected products are stored or used in high-temperature and high-humidity environments. If this occurs, the signal is not output from the CCD normally in Shooting Mode, which may cause a distorted image or the absence of an image. This malfunction can be confirmed on the LCD monitor screen during shooting. The same malfunction also appears on the recorded image.
Canon's Response:
Effective immediately, and regardless of warranty status, Canon will repair, free of charge, the products listed above exhibiting the above-mentioned malfunction if Canon determines that the malfunction is caused by the CCD image sensor. Canon will also cover the cost of shipping and handling in connection with this repair.
So the good news is that Canon will fix it for FREE:
U.S. residents are kindly directed to contact the Canon Customer Support Center for further assistance at 1-800-828-4040. Support hours are Monday thru Friday - 8:00 AM to 12:00 midnight; and Saturday 10:00 AM to 8:00 PM (all times EST). Alternatively, if electronic support is preferred, please send your email to carecenter@cits.canon.com
But the real issue is that your camera was one of a host of cameras that suffered from a faulty CCD chip. Check out this service advisory from Canon regarding it.
Malfunction:
It has been confirmed that the connecting parts of the internal wiring of the CCD used in affected products may become disconnected, especially if the affected products are stored or used in high-temperature and high-humidity environments. If this occurs, the signal is not output from the CCD normally in Shooting Mode, which may cause a distorted image or the absence of an image. This malfunction can be confirmed on the LCD monitor screen during shooting. The same malfunction also appears on the recorded image.
Canon's Response:
Effective immediately, and regardless of warranty status, Canon will repair, free of charge, the products listed above exhibiting the above-mentioned malfunction if Canon determines that the malfunction is caused by the CCD image sensor. Canon will also cover the cost of shipping and handling in connection with this repair.
So the good news is that Canon will fix it for FREE:
U.S. residents are kindly directed to contact the Canon Customer Support Center for further assistance at 1-800-828-4040. Support hours are Monday thru Friday - 8:00 AM to 12:00 midnight; and Saturday 10:00 AM to 8:00 PM (all times EST). Alternatively, if electronic support is preferred, please send your email to carecenter@cits.canon.com
Report Abuse
Did you find this answer
helpful or
not helpful?
helpful or
not helpful?
December 15, 2007 7:49 PM
0
0
0
Report Abuse
Did you find this answer
helpful or
not helpful?
helpful or
not helpful?
